as

How to change the IP address of the TP-Link router

You can change the IP (Internet Protocol) number of the TP-Link routers. The practice is necessary in situations where the user wants to install more than one router on the same network, since it avoids conflict between the devices. The change also serves as an extra security measure for the home network, for example, and can solve connection problems.

Want to buy cell phone, TV and other discount products? Know the Compare

The change of address is simple and anyone who has access to the configuration page of the device can perform the procedure. In the following tutorial, you will see how to change the IP of the TP-Link routers. It is important to emphasize that the step-by-step was done in the model TL-WR840N, but it is valid for other devices of the mark.

Company uses Wi-Fi and routers to even detect breathing; understand

Learn how to change the IP address of TP-Link routers

Before proceeding, you must connect your computer via a network cable (Ethernet) to one of the router's LAN ports. Normally, these ports are yellow behind the unit.

Connect the computer to the TP-Link router

Step 1. Open an Internet browser of your choice (Google Chrome, Mozilla Firefox or others), enter in the address bar the default IP "192.168.0.1", without quotation marks, and press Enter. If the address you entered does not work, read this other tutorial or watch the video below to find out the correct IP number of your router;

Learn how to find the IP address of the router

Step 2. The authentication screen will be displayed to access the router configuration page. The default user and device password is usually "admin", without quotation marks. Do not forget to click the "Login" button to enter the system;

Step 3. Now click on the "Network" side menu and then on the "LAN" submenu;

TP-Link Router Settings Page

Step 4. In the "IP Address" field, enter a new IP number (Ex: 192.168.1.1) and click the "Save" button to register the change in the firmware of the router. On the same page, you can check the MAC address of the device and also change the subnet mask, also known as subnet mask, that allows you to divide a specific network into smaller subnets;